Skip to main content
Want more images or videos?
Request additional images or videos from the seller
1 of 9

Charles and Ray Eames LCW Lounge Chairs, Early Production, circa 1950, Rare Pair

Price:$2,400
$3,800List Price

You May Also Like

1940s Pair of Early Charles Eames for Herman Miller LCW Lounge Chairs in Oak

1940s Pair of Early Charles Eames for Herman Miller LCW Lounge Chairs in Oak

By Herman Miller, Evans Products Company, Charles and Ray Eames

Located in Philadelphia, PA

Designed in the late 1940s by Charles Eames, this chair has cemented itself in Mid-Century Design like very few other pieces. Early models like this are difficult to come by and are very rarely in such good condition, as many have been worked on in some way or another before their value shot up. These chairs feature a super sleek design of steam-bent plywood, an incredibly innovative technique pioneered by Herman Miller in collaboration with the Eames's and manufacturing firm Evans. The large seat and back are mounted to a molded plywood base with rubber shock mounts, another Eames staple. This allows them to have excellent contrast through spacing, which gives them an excellent stance, almost insect-like. Both are early chairs with the correct screw configurations beneath. This pair features all original hardware, finish, and shock mounts. Very few blemishes, and those that exist are minimal, barely visible even in our high-res pictures. At this time, we have two early pairs, as seen in in photos. We also have another single early model, and two extremely rare pre-production chairs with the accompanying molded plywood coffee table...

Category

Vintage 1940s American Mid-Century Modern Lounge Chairs

Materials

Plywood

1950s Pair of Herman Miller Eames LCW Lounge Chairs in Calico Ash

1950s Pair of Herman Miller Eames LCW Lounge Chairs in Calico Ash

$5,500 / set

H 27.375 in W 22.25 in D 25.375 in

1950s Pair of Herman Miller Eames LCW Lounge Chairs in Calico Ash

By Herman Miller, Charles and Ray Eames

Located in Philadelphia, PA

This is a pair of LCW Lounge Chairs, originally designed by Ray and Charles Eames in 1948. They are early Herman Miller examples and feature the 5-2-4 screw pattern, dating back to t...

Category

Vintage 1950s American Modern Lounge Chairs

Materials

Steel

LCW lounge chairs by Charles and Ray Eames

LCW lounge chairs by Charles and Ray Eames

$7,884 / set

H 26.58 in W 21.66 in D 23.63 in

LCW lounge chairs by Charles and Ray Eames

By Charles and Ray Eames

Located in Hronská Breznica, Banskobystrický kraj

LCW lounge chairs by Charles and Ray Eames in excellent original condition from around 1960-70s

Category

Vintage 1960s Italian Mid-Century Modern Lounge Chairs

Materials

Plywood

1940s Pair of Early Charles Eames for Herman Miller Lcw Lounge Chairs in Birch

1940s Pair of Early Charles Eames for Herman Miller Lcw Lounge Chairs in Birch

By Herman Miller, Evans Products Company, Charles and Ray Eames

Located in Philadelphia, PA

Designed in the late 1940s by Charles Eames, this chair has cemented itself in Mid-Century Design like very few other pieces. Early models like this are difficult to come by and are very rarely in such good condition, as many have been worked on in some way or another before their value shot up. These chairs feature a super sleek design of steam-bent plywood, an incredibly innovative technique pioneered by Herman Miller in collaboration with the Eames's and manufacturing firm Evans. The large seat and back are mounted to a molded plywood base with rubber shock mounts, another Eames staple. This allows them to have excellent contrast through spacing, which gives them an excellent stance, almost insect-like. Both are early chairs with the 5-2-5 screw configurations beneath. This pair features all original hardware, finish, and shock mounts. Very few blemishes, and those that exist are minimal, barely visible even in our high-res pictures. At this time, we have two early pairs, as seen in in photos. We also have another single early model, and two extremely rare pre-production chairs with the accompanying molded plywood coffee table...

Category

Vintage 1940s American Mid-Century Modern Lounge Chairs

Materials

Rubber, Wood, Plywood

Early LCW Lounge Chair, Charles & Ray Eames, Herman Miller Evans Products 1940s

Early LCW Lounge Chair, Charles & Ray Eames, Herman Miller Evans Products 1940s

By Evans Products Company, Charles and Ray Eames, Charles Eames, Herman Miller

Located in Brussels, Brussels

Early LCW (Lounge Chair Wood) designed by Charles and Ray Eames and manufactured by Evans Products Company for Herman Miller, United States, circa 1947–1949. An authentic early-prod...

Category

Mid-20th Century American Mid-Century Modern Lounge Chairs

Materials

Plywood, Birch

Set of Two Eames DCW Lounge Chairs in Walnut for Herman Miller, USA, 1950s

Set of Two Eames DCW Lounge Chairs in Walnut for Herman Miller, USA, 1950s

By Charles and Ray Eames, Herman Miller

Located in Berlin, DE

Set of two Eames DCWlounge chairs in walnut for Herman Miller, USA. The DCW chair, also known as the dining chair wood, is a modernist furniture design created by the husband-and-wif...

Category

Vintage 1950s American Mid-Century Modern Dining Room Chairs

Materials

Walnut

Vintage Eames DCWs Dining Chair Wood for Herman Miller

Vintage Eames DCWs Dining Chair Wood for Herman Miller

$1,800 / set

H 29 in W 19.5 in D 21 in

Vintage Eames DCWs Dining Chair Wood for Herman Miller

By Herman Miller, Charles and Ray Eames

Located in Brooklyn, NY

Pair of DCW (Dining Chair Wood) in Ash wood, designed by Ray and Charles Eames for Herman Miller. This iconic mid-century design features molded wood with gracefully curving planes. ...

Category

20th Century Mid-Century Modern Dining Room Chairs

Materials

Ash

Early Eames Herman Miller  LCW

Early Eames Herman Miller LCW

$2,800

H 26.5 in W 22 in D 23 in

Early Eames Herman Miller LCW

By Charles and Ray Eames, Herman Miller

Located in New York, NY

Hard to find early Eames design lounge chair, in very good, clean, ready to use condition. The chair features the large single piece rubber bumper and 4/2/5 screw configuration, help...

Category

Mid-20th Century American Mid-Century Modern Lounge Chairs

Materials

Metal

Charles Eames MAX Armshell Lounge Chairs

Charles Eames MAX Armshell Lounge Chairs

$3,600 / set

H 26 in W 25 in D 24 in

Charles Eames MAX Armshell Lounge Chairs

By Charles and Ray Eames

Located in San Francisco, CA

Charles and Ray Eames designed MAX low lounge arm shells with X-base. Original black base and screws in excellent original condition. These are wonderful early transitional parchment...

Category

Vintage 1950s American Mid-Century Modern Lounge Chairs

Materials

Fiberglass

Charles & Ray Eames Early LCW Lounge Chair for Herman Miller, 1951

Charles & Ray Eames Early LCW Lounge Chair for Herman Miller, 1951

By Herman Miller, Charles Eames

Located in Buffalo, NY

Iconic Charles & Ray Eames LCW lounge chair in Birch plywood. Early Herman Miller production from the fifties (5-2-4 screw configuration), just after Herman Miller took over producti...

Category

Vintage 1950s American Mid-Century Modern Lounge Chairs

Materials

Birch, Plywood

More From This Seller

View All
Tandem Sling Armchair by Ray and Charles Eames for Herman Miller, c 1970

Tandem Sling Armchair by Ray and Charles Eames for Herman Miller, c 1970

By Herman Miller, Charles and Ray Eames

Located in Los Angeles, CA

This single 'Tandem' sling armchair, designed by Charles and Ray Eames for Herman Miller, is part of the iconic modular seating system originally introduced for airports and public spaces in the mid-20th century. The design reflects the Eameses’ ability to combine industrial efficiency with refined modernist aesthetics. *NOTE, we have another one in a separate listing if you wish to create a pair of chairs. The chair features a cast aluminum frame with a sculptural profile, supporting a suspended sling seat and back upholstered in black leatherette. The tailored upholstery is tensioned within the frame, creating a supportive yet flexible seating experience while maintaining a clean, architectural silhouette. Originally conceived as part of a connected beam seating system, this example has been configured as an individual armchair, allowing it to function as a standalone piece in a variety of interior settings. The aluminum frame provides both durability and visual lightness, while the black upholstery offers a timeless and versatile palette. The gently reclined back and integrated armrests contribute to the chair’s comfort, making it well-suited for use as a lounge chair, office chair, side chair, or accent chair. Its industrial origins also lend themselves well to interiors ranging from Mid-Century Modern and Modernist to Industrial and Contemporary environments. The Eames Tandem...

Category

Vintage 1970s American Mid-Century Modern Lounge Chairs

Materials

Aluminum

Tandem Sling Armchair by Ray and Charles Eames for Herman Miller, c 1970

Tandem Sling Armchair by Ray and Charles Eames for Herman Miller, c 1970

By Charles and Ray Eames, Herman Miller

Located in Los Angeles, CA

This single 'Tandem' sling armchair, designed by Charles and Ray Eames for Herman Miller, is part of the iconic modular seating system originally introduced for airports and public spaces in the mid-20th century. The design reflects the Eameses’ ability to combine industrial efficiency with refined modernist aesthetics. NOTE - we have another one listed if you wish to create a pair. The chair features a cast aluminum frame with a sculptural profile, supporting a suspended sling seat and back upholstered in black leatherette. The tailored upholstery is tensioned within the frame, creating a supportive yet flexible seating experience while maintaining a clean, architectural silhouette. Originally conceived as part of a connected beam seating system, this example has been configured as an individual armchair, allowing it to function as a standalone piece in a variety of interior settings. The aluminum frame provides both durability and visual lightness, while the black upholstery offers a timeless and versatile palette. The gently reclined back and integrated armrests contribute to the chair’s comfort, making it well-suited for use as a lounge chair, office chair, side chair, or accent chair. Its industrial origins also lend themselves well to interiors ranging from Mid-Century Modern and Modernist to Industrial and Contemporary environments. The Eames Tandem...

Category

Vintage 1970s American Mid-Century Modern Lounge Chairs

Materials

Aluminum

1970s Model 'EA-416' Soft Pad Chair by Charles Eames for Herman Miller, Signed

1970s Model 'EA-416' Soft Pad Chair by Charles Eames for Herman Miller, Signed

By Charles Eames, Ray Eames, Herman Miller

Located in Los Angeles, CA

A classic of modernist comfort, this vintage "early production year" model EA-416 swivel lounge chair by Charles and Ray Eames for Herman Miller is part of the iconic Soft Pad series...

Category

Vintage 1970s American Mid-Century Modern Lounge Chairs

Materials

Aluminum

'Soft Pad' Swivel / Desk Chair by Charles Eames for Herman Miller, 1980s, Signed

'Soft Pad' Swivel / Desk Chair by Charles Eames for Herman Miller, 1980s, Signed

By Herman Miller, Ray Eames, Charles Eames

Located in Los Angeles, CA

A classic of modernist comfort, this brown leather swivel desk chair by Charles and Ray Eames for Herman Miller is part of the iconic Soft Pad series, originally introduced in 1969. ...

Category

Vintage 1980s American Mid-Century Modern Office Chairs and Desk Chairs

Materials

Aluminum

Charles Eames for Herman Miller Tandem Aluminum Lounge Chairs in Edelman Leather

Charles Eames for Herman Miller Tandem Aluminum Lounge Chairs in Edelman Leather

By Herman Miller, Charles and Ray Eames

Located in Los Angeles, CA

Incredible pair of restored and reimagined Charles and Ray Eames for Herman Miller, 1962 Collection, Tandem modular seating that was originally designed for Chicago O'Hare Airport, w...

Category

Vintage 1960s American Mid-Century Modern Chairs

Materials

Aluminum

Restored Charles Eames for Herman Miller Tandem Seating System w Edelman Leather

Restored Charles Eames for Herman Miller Tandem Seating System w Edelman Leather

By Herman Miller, Charles and Ray Eames

Located in Los Angeles, CA

This exemplary Charles and Ray Eames for Herman Miller 'Tandem' seating system was designed in 1962, originally for Chicago O'Hare airport and then adopted by many other airports and...

Category

Vintage 1960s American Mid-Century Modern Loveseats

Materials

Aluminum