The Louise Card Table in Medium Hammered White Bronze is 32 inches square and 30 inches tall, the four cabriole legs encased in Medium Hammered White Bronze metal from foot to apron, the serpentine apron curving between them, and the square top covered in the same surface. At this scale, the piece works at cards, chess, or as a side table beside a chair or sofa. In Medium Hammered White Bronze, the hand-applied metal surface and the carved leg profile are equally visible from across a room and from close.
The teak legs are carved before Medium Hammered White Bronze metal sheets are pattern-cut and fitted by hand. The compound S-curve of each cabriole leg is covered without join; the apron and top are fitted separately and secured with flush-set nails. The top carries the geometric panel lines characteristic of hand-applied metal sheeting.
Measures 32 inches square, 30 inches tall. Functions as a card table, game table, side table, or accent table. The square form seats two to four for cards or games. Available in all twelve standard finishes. Custom sizing available. Made entirely to order.
Designed by Paul Mathieu for Stephanie Odegard Collection. The Louise series draws its formal language from the Louis XV period, specifically the cabriole leg that defined the period's furniture across France and England. The Card Table is the series at its most practical scale. Produced in Udaipur.
Made to order, each piece may show slight variations that are a natural result of handmade metal-clad production. The Medium Hammered White Bronze surface will gradually mellow in tone over time, which is part of the material's natural character.
The images shown in this listing may be photographed in different lighting conditions or may include 3D illustrations created to represent the available finishes. We warmly encourage customers to request an individual sample or a complete sample set of all twelve finishes to experience the surface, tone, and character firsthand.
Please note that moisture in the air, seasonal climate shifts, and the natural movement of wood over time may cause the metal surface to develop slight wrinkles or occasional bubbling. We use well-seasoned reclaimed teak and high-quality marine-grade MDF wherever technically possible to minimise these natural effects, but complete stability of metal cannot be guaranteed.
All smooth finishes will show subtle tool marks. These are not defects but a natural and unavoidable result of hand-working and hand-polishing metal sheets. Our hammered finishes are recommended where a more textured, forgiving surface is preferred.
None of our metal-clad pieces are sealed with a permanent protective coating. This allows the metal to age naturally and beautifully over time. We polish every piece carefully before packing. A clear PU coat can be applied on request.
The antiqued white bronze finish will react with natural elements the fastest in the beginning, but it too will stop reacting and settle into a stable state like copper after 6-12 months. Since it is already antiqued and looks intentionally tarnished, this early reaction does not change the overall appearance. In that way, this surface is the most forgiving.
The antiqued white bronze finish is done by applying an acidic chemical over the white bronze to recreate a natural patination. Like the aging of silver, copper, or brass, the final result and colour uniformity cannot be guaranteed. The goal of this finish is to achieve rainbow-like tones with dull, shiny, cloudy, and lightly streaked patches to give an illusion of antiquing.
As a default practice, we offer a protective wipe-on PU coat only on this finish. If a designer prefers the natural, uncoated aging, we can leave it untreated just like the other finishes. A PU coat helps keep the surface looking the same as when shipped, but it does not create a fully uniform patina; natural variation will always remain part of this finish.