Skip to main content
Video Loading
Want more images or videos?
Request additional images or videos from the seller
1 of 10

Collectible Smooth Brass Console Table – Cabriole Leg, Handmade

$8,000per item
£6,058.98per item
€7,077.23per item
CA$11,451.86per item
A$11,608.78per item
CHF 6,602.73per item
MX$141,311.58per item
NOK 77,443.61per item
SEK 77,632.88per item
DKK 52,902.28per item
Quantity

About the Item

The Louise Console Table in Smooth Brass has four hand-carved cabriole legs covered in Smooth Brass metal from foot to apron, a 60-inch top in the same surface, and the geometric panel lines and flush-set nail heads of hand-applied sheeting across the full width. The serpentine apron curves between the legs. At 18 inches deep and 30.5 inches tall, the proportions suit placement against a wall, in an entry, or behind a sofa. The teak legs are carved before Smooth Brass metal is pattern-cut and fitted by hand. The S-curve of each cabriole leg is covered without visible join; the top and apron are fitted separately and secured with flush-set nails. The top carries the geometric panel lines characteristic of hand-applied sheeting. Measures 60 by 18 by 30.5 inches. Works as a console table, entry table, hall table, or sofa table. Available in all twelve standard finishes. Custom sizing available. Made entirely to order. Designed by Paul Mathieu for Stephanie Odegard Collection. The Louise Console Table brings the cabriole leg and serpentine apron of the Louise series to the narrow console form. Produced in Udaipur. Made to order, each piece may show slight variations that are a natural result of handmade metal-clad production. The Smooth Brass surface will gradually mellow in tone over time, which is part of the material's natural character. The images shown in this listing may be photographed in different lighting conditions or may include 3D illustrations created to represent the available finishes. We warmly encourage customers to request an individual sample or a complete sample set of all twelve finishes to experience the surface, tone, and character firsthand. Please note that moisture in the air, seasonal climate shifts, and the natural movement of wood over time may cause the metal surface to develop slight wrinkles or occasional bubbling. We use well-seasoned reclaimed teak and high-quality marine-grade MDF wherever technically possible to minimise these natural effects, but complete stability of metal cannot be guaranteed. All smooth finishes will show subtle tool marks. These are not defects but a natural and unavoidable result of hand-working and hand-polishing metal sheets. Our hammered finishes are recommended where a more textured, forgiving surface is preferred. None of our metal-clad pieces are sealed with a permanent protective coating. This allows the metal to age naturally and beautifully over time. We polish every piece carefully before packing. A clear PU coat can be applied on request. The antiqued white bronze finish will react with natural elements the fastest in the beginning, but it too will stop reacting and settle into a stable state like copper after 6-12 months. Since it is already antiqued and looks intentionally tarnished, this early reaction does not change the overall appearance. In that way, this surface is the most forgiving. The antiqued white bronze finish is done by applying an acidic chemical over the white bronze to recreate a natural patination. Like the aging of silver, copper, or brass, the final result and colour uniformity cannot be guaranteed. The goal of this finish is to achieve rainbow-like tones with dull, shiny, cloudy, and lightly streaked patches to give an illusion of antiquing. As a default practice, we offer a protective wipe-on PU coat only on this finish. If a designer prefers the natural, uncoated aging, we can leave it untreated just like the other finishes. A PU coat helps keep the surface looking the same as when shipped, but it does not create a fully uniform patina; natural variation will always remain part of this finish.
  • Creator:
  • Dimensions:
    Height: 30.5 in (77.47 cm)Width: 60 in (152.4 cm)Depth: 18 in (45.72 cm)
  • Style:
    Modern (Of the Period)
  • Materials and Techniques:
  • Place of Origin:
  • Period:
  • Date of Manufacture:
    2025
  • Production Type:
    New & Custom(Current Production)
  • Estimated Production Time:
    11-12 weeks
  • Condition:
  • Seller Location:
    New York, NY
  • Reference Number:
    Seller: LCONS-BR-SM-0081stDibs: LU4236149889192

More From This Seller

View All
Smooth Brass Console Table – Cabriole Leg Louise Table, Paul Mathieu

Smooth Brass Console Table – Cabriole Leg Louise Table, Paul Mathieu

By Paul Mathieu (French)

Located in New York, NY

The Louise Console Table was designed by Paul Mathieu as part of the Louise series. In Smooth Brass, the four cabriole legs, the serpentine apron, and the 60-inch top are all covered...

Category

21st Century and Contemporary Indian Modern Console Tables

Materials

Brass, Sheet Metal

Smooth Brass Hall Table – Louise Cabriole Leg Console Table, Handmade

Smooth Brass Hall Table – Louise Cabriole Leg Console Table, Handmade

By Paul Mathieu (French)

Located in New York, NY

The Louise Console Table in Smooth Brass is 60 inches wide and 18 inches deep on four cabriole legs, the Smooth Brass metal covering legs, apron, and top in a continuous surface. The...

Category

21st Century and Contemporary Indian Modern Console Tables

Materials

Brass, Sheet Metal

Smooth Brass Console Table – Sculptural Cabriole Leg Sofa Table, Handmade

Smooth Brass Console Table – Sculptural Cabriole Leg Sofa Table, Handmade

By Paul Mathieu (French)

Located in New York, NY

The Louise Console Table in Smooth Brass is 60 inches wide at 18 inches deep: the right proportion for placement behind a sofa or along a corridor wall. The four hand-carved cabriole...

Category

21st Century and Contemporary Indian Modern Sofa Tables

Materials

Brass, Sheet Metal

Smooth Brass Sofa Table – Louise XV Cabriole Leg Console Table

Smooth Brass Sofa Table – Louise XV Cabriole Leg Console Table

By Paul Mathieu (French)

Located in New York, NY

The Louise Console Table in Smooth Brass is 60 inches wide at 18 inches deep, four cabriole legs in Smooth Brass metal carrying the piece behind a sofa or against a wall at 30.5 inch...

Category

21st Century and Contemporary Indian Modern Sofa Tables

Materials

Brass, Sheet Metal

Smooth Brass Console Table – Hollywood Regency Cabriole Leg Hall Table

Smooth Brass Console Table – Hollywood Regency Cabriole Leg Hall Table

By Paul Mathieu (French)

Located in New York, NY

The Louise Console Table in Smooth Brass is 60 inches wide, 18 deep, and 30.5 tall, entirely in Smooth Brass metal from the tips of the four cabriole legs to the geometric panel surf...

Category

21st Century and Contemporary Indian Hollywood Regency Console Tables

Materials

Brass, Sheet Metal

Smooth Brass Console Table – Art Deco Cabriole Leg Entry Table, Handmade

Smooth Brass Console Table – Art Deco Cabriole Leg Entry Table, Handmade

By Paul Mathieu (French)

Located in New York, NY

The Louise Console Table in Smooth Brass is 60 inches of Smooth Brass metal on four cabriole legs: the top, sides, apron, and legs all covered in a continuous Smooth Brass surface ap...

Category

21st Century and Contemporary Indian Art Deco Console Tables

Materials

Brass, Sheet Metal

You May Also Like

Brass Console Table by Mastercraft 1970's

Brass Console Table by Mastercraft 1970's

Located in Hudson, NY

The Mastercraft "Trilobi" is a highly sought-after, mid-century modern designed table from the 1970s. Originally designed by Ringo Starr and Robin Cruikshank as the "RoR" table, it w...

Category

Vintage 1970s American Hollywood Regency Console Tables

Materials

Brass

Brass Mid Century Console Table

Brass Mid Century Console Table

Located in Westwood, NJ

Crafted with a polished brass frame, its sleek structure exudes luxury, while the tempered clear glass top provides a refined contrast. Its delicate yet sturdy design makes it perfec...

Category

21st Century and Contemporary Vietnamese Mid-Century Modern Console Tables

Materials

Brass

21st Century Filippo Feroldi Brass Console Table Glass Top Various Colors

21st Century Filippo Feroldi Brass Console Table Glass Top Various Colors

By Filippo Feroldi, Purho + Colleoni Arte

Located in Brembate di Sopra (BG), IT

21st century Filippo Feroldi brass console table back-colored glass top various colors Designed by Filippo Feroldi for Purho and Colleoni Arte, Holo Console is characterized by a pa...

Category

21st Century and Contemporary Italian Modern Console Tables

Materials

Brass

Parsons Style Brass Console Table Attributed to Directional Circa 1970s

Parsons Style Brass Console Table Attributed to Directional Circa 1970s

By Directional, Mastercraft

Located in Peabody, MA

Brass parson's style six foot long console or sofa table with inset glass top attributed to Directional, circa 1970s.

Category

Vintage 1970s American Mid-Century Modern Console Tables

Materials

Brass

Cristal Art Consolle Brass Opaline Glass 1950 Italy

Cristal Art Consolle Brass Opaline Glass 1950 Italy

By Cristal Arte

Located in Milano, IT

Cristal Art Consolle Brass Opaline Glass 1950 Italy

Category

Vintage 1950s Italian Other Console Tables

Materials

Brass

John Widdicomb for Mastercraft Brass Frame Console Table

John Widdicomb for Mastercraft Brass Frame Console Table

By John Widdicomb

Located in Toledo, OH

Console table by John Widdicomb in a heavy brass sculpted frame with a faux marble finish top and three drawers with brass handles, and a 1978 label in the back of one of the drawers...

Category

Mid-20th Century Console Tables

Materials

Brass