Skip to main content
Video Loading
Want more images or videos?
Request additional images or videos from the seller
1 of 10

Smooth Brass Demi Console Table – Louise Cabriole Leg

$4,457per item
£3,378.58per item
€3,940.33per item
CA$6,397.02per item
A$6,449.43per item
CHF 3,672.39per item
MX$78,395.55per item
NOK 43,350.74per item
SEK 43,226.29per item
DKK 29,453.47per item
Quantity

About the Item

Three cabriole legs in Smooth Brass metal carry a half-moon top at 30 inches. The flat back edge of the Louise Demi Console Table sits flush against the wall; the curved front edge projects 15.5 inches into the room. All surfaces are fully clad in Smooth Brass, including the flat back. The two outer legs are set at the rear corners; the third is centred at the front under the apex of the curve. The serpentine apron follows the curved front. The teak structure is built to the half-moon form before Smooth Brass metal sheets are hand-fitted to every surface. The three cabriole legs are covered in Smooth Brass on the full S-curve; the curved top, apron, and flat back edge are all individually fitted and secured with flush-set nails. Measures 31 by 15.5 by 30 inches. Works as a demi-lune console, entry table, or hall table. Available in all twelve standard finishes. Custom sizing available. Made entirely to order. Designed by Paul Mathieu for Stephanie Odegard Collection. The Louise Demi Console Table brings the demi-lune wall table tradition together with the cabriole leg of the Louise series, producing a piece that belongs to both the French classical interior and the contemporary one. Produced in Udaipur. Made to order, each piece may show slight variations that are a natural result of handmade metal-clad production. The Smooth Brass surface will gradually mellow in tone over time, which is part of the material's natural character. The images shown in this listing may be photographed in different lighting conditions or may include 3D illustrations created to represent the available finishes. We warmly encourage customers to request an individual sample or a complete sample set of all twelve finishes to experience the surface, tone, and character firsthand. Please note that moisture in the air, seasonal climate shifts, and the natural movement of wood over time may cause the metal surface to develop slight wrinkles or occasional bubbling. We use well-seasoned reclaimed teak and high-quality marine-grade MDF wherever technically possible to minimise these natural effects, but complete stability of metal cannot be guaranteed. All smooth finishes will show subtle tool marks. These are not defects but a natural and unavoidable result of hand-working and hand-polishing metal sheets. Our hammered finishes are recommended where a more textured, forgiving surface is preferred. None of our metal-clad pieces are sealed with a permanent protective coating. This allows the metal to age naturally and beautifully over time. We polish every piece carefully before packing. A clear PU coat can be applied on request. The antiqued white bronze finish will react with natural elements the fastest in the beginning, but it too will stop reacting and settle into a stable state like copper after 6-12 months. Since it is already antiqued and looks intentionally tarnished, this early reaction does not change the overall appearance. In that way, this surface is the most forgiving. The antiqued white bronze finish is done by applying an acidic chemical over the white bronze to recreate a natural patination. Like the aging of silver, copper, or brass, the final result and colour uniformity cannot be guaranteed. The goal of this finish is to achieve rainbow-like tones with dull, shiny, cloudy, and lightly streaked patches to give an illusion of antiquing. As a default practice, we offer a protective wipe-on PU coat only on this finish. If a designer prefers the natural, uncoated aging, we can leave it untreated just like the other finishes. A PU coat helps keep the surface looking the same as when shipped, but it does not create a fully uniform patina; natural variation will always remain part of this finish.
  • Creator:
  • Dimensions:
    Height: 30 in (76.2 cm)Width: 31 in (78.74 cm)Depth: 15.5 in (39.37 cm)
  • Style:
    Modern (Of the Period)
  • Materials and Techniques:
  • Place of Origin:
  • Period:
  • Date of Manufacture:
    2025
  • Production Type:
    New & Custom(Current Production)
  • Estimated Production Time:
    11-12 weeks
  • Condition:
  • Seller Location:
    New York, NY
  • Reference Number:
    Seller: LDCT-BR-SM-0051stDibs: LU4236149998722

More From This Seller

View All
Smooth Brass Demi Lune Console Table – Louise Cabriole Leg

Smooth Brass Demi Lune Console Table – Louise Cabriole Leg

By Paul Mathieu (French)

Located in New York, NY

The Louise Demi Console Table in Smooth Brass has a half-moon top, flat at the back and curved at the front, on three cabriole legs in Smooth Brass metal. The flat back edge sits flu...

Category

21st Century and Contemporary Indian Modern Console Tables

Materials

Brass, Sheet Metal

Smooth Brass Half Moon Console Table – Louise, Paul Mathieu

Smooth Brass Half Moon Console Table – Louise, Paul Mathieu

By Paul Mathieu (French)

Located in New York, NY

The Louise Demi Console Table in Smooth Brass is a half-moon table: 31 inches wide, 15.5 inches deep, 30 inches tall, three cabriole legs, and a top that is curved at the front and f...

Category

21st Century and Contemporary Indian Modern Console Tables

Materials

Brass, Sheet Metal

Smooth Brass Louise Demi Console – Half Moon Entry Table

Smooth Brass Louise Demi Console – Half Moon Entry Table

By Paul Mathieu (French)

Located in New York, NY

The Louise Demi Console Table in Smooth Brass is a half-moon entry table: three cabriole legs, a curved front edge, a flat back that sits against the wall. All surfaces clad in Smoot...

Category

21st Century and Contemporary Indian Modern Console Tables

Materials

Brass, Sheet Metal

Collectible Smooth Brass Demi Lune Table – Paul Mathieu

Collectible Smooth Brass Demi Lune Table – Paul Mathieu

By Paul Mathieu (French)

Located in New York, NY

The Louise Demi Console Table in Smooth Brass has a half-moon top, 31 inches wide and 15.5 inches deep, on three cabriole legs. The centre leg sits below the apex of the curve; the t...

Category

21st Century and Contemporary Indian Modern Console Tables

Materials

Brass, Sheet Metal

Smooth Brass Louise Demi Console Table – Half Moon, Paul Mathieu

Smooth Brass Louise Demi Console Table – Half Moon, Paul Mathieu

By Paul Mathieu (French)

Located in New York, NY

The Louise Demi Console Table has a half-moon top: a flat edge at the back that sits flush against the wall, and a curved front edge that projects into the room. Three cabriole legs ...

Category

21st Century and Contemporary Indian Louis XV Console Tables

Materials

Brass, Sheet Metal

Hollywood Regency Smooth Brass Demi Console – Paul Mathieu

Hollywood Regency Smooth Brass Demi Console – Paul Mathieu

By Paul Mathieu (French)

Located in New York, NY

The Louise Demi Console Table in Smooth Brass is 31 inches wide and 15.5 inches deep, with a half-moon top — flat back against the wall, curved front projecting into the room. Three ...

Category

21st Century and Contemporary Indian Hollywood Regency Console Tables

Materials

Brass, Sheet Metal

You May Also Like

DeCastelli Convivium Console Table in DeErosion Brass by Nikita Bettoni

DeCastelli Convivium Console Table in DeErosion Brass by Nikita Bettoni

By Nikita Bettoni, DeCastelli

Located in Brooklyn, NY

Inspired by the table of the same name, Convivium consolle leans against the wall with curvy and graceful attitude. Entirely made in brass, this piece stands out for the DeErosion fi...

Category

21st Century and Contemporary Italian Modern Console Tables

Materials

Brass

DeCastelli Convivium Console Table in DeLabré Orbitale Brass by Nikita Bettoni

DeCastelli Convivium Console Table in DeLabré Orbitale Brass by Nikita Bettoni

By DeCastelli, Nikita Bettoni

Located in Brooklyn, NY

Inspired by the table of the same name, Convivium consolle leans against the wall with curvy and graceful attitude. Entirely made in brass, this piece stands out for the DeErosion finishing of the top and the flowing movement of its curved legs. Additional Information: Materials: Brass Finish: DeLabré orbitale brass...

Category

21st Century and Contemporary Italian Modern Console Tables

Materials

Brass

Brass Console Table by Mastercraft 1970's

Brass Console Table by Mastercraft 1970's

Located in Hudson, NY

The Mastercraft "Trilobi" is a highly sought-after, mid-century modern designed table from the 1970s. Originally designed by Ringo Starr and Robin Cruikshank as the "RoR" table, it w...

Category

Vintage 1970s American Hollywood Regency Console Tables

Materials

Brass

Fine Mid Century Modern Italian Brass Nickel Console Table L'Angolo Metallarte

Fine Mid Century Modern Italian Brass Nickel Console Table L'Angolo Metallarte

By L'Angolo Metallarte

Located in Roslyn, NY

Fine Mid Century Modern Italian Brass Nickel Console Table L'Angolo Metallarte. An Italian console by L'Angolo Metallarte, Rome, a rare find entirely handmade with wooden structure,...

Category

20th Century Art Deco Console Tables

Materials

Brass, Nickel

Parsons Style Brass Console Table Attributed to Directional Circa 1970s

Parsons Style Brass Console Table Attributed to Directional Circa 1970s

By Mastercraft, Directional

Located in Peabody, MA

Brass parson's style six foot long console or sofa table with inset glass top attributed to Directional, circa 1970s.

Category

Vintage 1970s American Mid-Century Modern Console Tables

Materials

Brass

20th-Century Gold-Plated Brass and Wood Italian Console Table, 1950

20th-Century Gold-Plated Brass and Wood Italian Console Table, 1950

Located in Vicoforte, Piedmont

Mid-20th-century Italian console table. Chiseled and gilded brass furniture with a mahogany top. This compact console table stands on three curved legs with ball feet and a central j...

Category

Vintage 1950s Italian Console Tables

Materials

Brass